17 June 2019 // Airplus

Ceiling type heat pump heat recovery devices are devices that provide energy saving by recovering heat energy without mixing the exhaust air and fresh air with the help of the fans inside, thanks to the plate heat exchanger designed to meet the exhaust and fresh air needs in indoor spaces. Ceiling type heat pump heat recovery devices are compact devices designed to provide high indoor air quality as well as saving energy.

In addition to its energy saving advantage, it also meets the need for air-conditioned fresh air in workplaces, banks, offices, hotels, homes, cinemas, fair-exhibition areas, hospitals, multi-purpose halls, restaurants, coffee halls and places where such high-density exhaust is required. The system operates in heating or cooling mode according to the season selection made from the panel. The device has automatic free-cooling feature and this feature allows more savings in operating costs.

It is produced as 3 standard models in the range of 1000 m³/h - 3000 m³/h air flow. The produced models are designed in such a way that they can be easily installed and maintained at a height that can be placed in the suspended ceiling. The device has a compact structure with evaporator, condenser, compressor, heating-cooling equipment and control panel.

The Control Unit is capable of controlling the basic equipment and optional accessories that can be used in the Heat Pump Heat Recovery Device. The frame of the ceiling type heat pump heat recovery device is manufactured from natural anodized aluminum profile and plastic corner elements. Cell panels are made of 42 mm thick rock wool, the outer wall is electrostatic powder painted and the inner wall is made of galvanized sheet. It has self-powered, imported, silent, single-phase (230 V) plug fans suitable for speed control. Aluminum plate heat exchangers with 40-50% efficiency are used in our heat recovery devices. High efficiency scroll compressors are used in Heat Pump Heat Recovery devices. The safety of the system is ensured by low and high pressure pressure switches. Copper tube - aluminum fin type high efficiency evaporator and condenser are used. A distributor is used for homogeneous refrigerant distribution at the evaporator inlet. Air side pressure losses are reduced as air velocities are selected at 2.5 m/s or less in the evaporator and condenser. There is a condensation pan made of stainless steel under the evaporator and condenser. After being cleaned from the particles in the outdoor and indoor air with the G2 class filters in the fresh air and exhaust lines of the devices, it is passed through the plate heat recovery exchanger. Thus, the room blowing air is cleaned of particles and plate heat recovery is free from dirt.

The products of AIRPLUS AIR CONDITIONING TECHNOLOGIES, which has been producing and serving in the air conditioning sector for 11 years with 100% Turkish Capital, have been used for years in many countries with different climates besides Turkey.

The product range of AIRPLUS is very wide to cover all HVAC projects: Air Handling Unit (with automatic control panel / special design depending on customer request), Air Handling Unit with DX Coil (with automatic control panel / special design according to needs), Rooftop Package Air Handling Unit (Rooftop), Hygienic Type Package Air Handling Unit, Concealed Floor Type Fan Coil Unit, Indoor Swimming Pool Dehumidification Unit, Hood Unit (Electrostatic Filter), Ceiling Type Heat Pump Heat Recovery Device, Ceiling Type Heat Recovery Device, DX Coil Ceiling Type Heat Recovery Device, Cell Aspirator, Fan, Hot Air Apparatus (Axial/Radial Fan), Floor Convector, Shaft Damper, Shelter Fan, Rectangular Duct Type Fan, Duct Type Electric Heater, HEPA Filter Box. AIRPLUS carries out its production in its facility in Istanbul Çekmeköy with its qualified personnel and draws attention with its initial investment cost, equipment and workmanship quality, energy efficiency, flexible solution alternatives suitable for the project, appropriate delivery times and original design.