PLN P

Galletti's PLN P is a multipurpose air-water chiller unit featuring the natural refrigerant R290 and total heat recovery for 50-150 kW applications.

Galletti developed the PLN P range to address the need for advanced solutions that combine reduced environmental impact, efficiency, and reliability, while phasing out fossil fuels in building heating and cooling. The units feature total heat recovery, a natural refrigerant, and multi-scroll solutions that deliver exceptional performance across varied operating conditions.

The range comprises seven models with cooling capacities spanning 50 to 150 kW, using multiple compressors on the same circuit for optimized partial-load performance. This configuration achieves some of the highest seasonal efficiency ratings on the HVAC market: SCOP up to 4.00 and SEER up to 5.00, alongside multipurpose heat recovery capabilities.

Top-quality components ensure state-of-the-art efficiency and reliability. The units produce water up to 78°C and operate at full capacity when outdoor temperatures range from -20°C to 48°C, with the capability to generate 50°C hot water even at -20°C ambient temperatures.

PLN P

Power range: 50-150 kW

Galletti developed the PLN P range to address the need for advanced solutions that combine reduced environmental impact, efficiency, and reliability, while phasing out fossil fuels in building heating and cooling. The units feature total heat recovery, a natural refrigerant, and multi-scroll solutions that deliver exceptional performance across varied operating conditions.

The range comprises seven models with cooling capacities spanning 50 to 150 kW, using multiple compressors on the same circuit for optimized partial-load performance. This configuration achieves some of the highest seasonal efficiency ratings on the HVAC market: SCOP up to 4.00 and SEER up to 5.00, alongside multipurpose heat recovery capabilities.

Top-quality components ensure state-of-the-art efficiency and reliability. The units produce water up to 78°C and operate at full capacity when outdoor temperatures range from -20°C to 48°C, with the capability to generate 50°C hot water even at -20°C ambient temperatures.

Information Request

Plus

  • Uses the natural refrigerant R290 (GWP = 3)
  • Total recovery of condensation heat
  • Multi-scroll solutions
  • Very high seasonal efficiency values
  • Maximum temperature of the water produced: 78°C
  • Water produced at 50°C with an outside air temperature of -20°C
  • Finned coil circuit designed to ensure reverse-flow exchange between air and refrigerant in every operating mode.

Features and Versions

  • 7 models
  • Multipurpose version with total heat recovery for 4-pipe systems
  • Low-noise acoustic configurations
  • Electronic expansion valve as a standard feature
  • High configurability of options and accessories
  • On-board hydronic kit with 4 pumps and 1 inertial buffer tank
  • Advanced logic for unit safety in case of refrigerant leakage